FİXA REPOX 302: Flowable Epoxy-Based Anchoring and Installation Mortar

FİXA REPOX 302 is a three-component (A+B+C), solvent-free, epoxy resin-based, flowable anchoring and installation mortar that provides high adhesion and mechanical strength on concrete, steel, and rock surfaces. Thanks to its self-leveling structure, it ensures void-free filling and is ideal for heavy-duty applications.

Product Description

• Three-component (A+B+C) epoxy resin-based formulation
• Solvent-free and low VOC content
• Flowable, self-leveling consistency
• High compressive and flexural strength
• Low shrinkage and high corrosion resistance
• Reliable anchoring and installation on reinforced concrete, steel, and rock surfaces

Application Areas

• Casting, repair, and anchoring mortar applications in indoor and outdoor areas
• Rebar dowel installation into reinforced concrete elements
• Fixing of anchoring components
• Repair of horizontal cracks
• Bridges, viaducts, dams, and highway structures
• Steel railings, stairs, crane rails, and base connections
• Installation of metal components onto concrete or steel surfaces
• Anchoring of iron, reinforcement bars, or steel elements into rock, concrete, or masonry surfaces

Technical Specifications

Advantages

• Flowable Structure: Self-leveling feature provides complete filling without leaving voids.
• High Mechanical Strength: Provides compressive strength up to 95 MPa.
• Excellent Adhesion: Strong bonding performance on concrete, metal, and stone surfaces.
• Corrosion Resistance: Protects metal anchoring elements against corrosion.
• Solvent-Free Formula: Low VOC and environmentally friendly formulation.
• Fast Application: Optimized pot life helps accelerate construction processes.
• CE Certified Quality Assurance

Application Method

Surface Preparation

• Concrete and metal surfaces must be clean, dry, and free from dust, oil, and loose particles.
• Anchor holes should be drilled with suitable diameter and depth, then cleaned with compressed air.

Mixing

• Components A and B should be mixed with a low-speed mixer until a homogeneous mixture is obtained.
• Component C (aggregate/filler component) should then be added slowly and mixed thoroughly.

Application

• The prepared mixture is poured into anchor holes or molds using the casting method.
• If required, it can be spread over the surface using a spatula or trowel.

Curing

• The applied surface should be protected from impact and vibration for at least 24 hours.
• Full mechanical strength is achieved after 7 days.

Limitations and Precautions

• Do not apply on wet or water-filled surfaces.
• Application temperature should not be below +10°C.
• The product must be used within its pot life period.
• Protect the application area from direct sunlight and rain during curing.

Conclusion

FİXA REPOX 302 provides a reliable and long-lasting solution for industrial, infrastructure, and structural installation applications with its self-leveling flowable structure and high mechanical performance. It is an ideal product for secure anchoring and installation operations on reinforced concrete, steel, and rock surfaces.

Frequently Asked Questions (FAQ)

What is FİXA REPOX 302?

It is a three-component, solvent-free, epoxy-based flowable anchoring and installation mortar.

Where is it used?

It is used for rebar dowel installation, metal component installation, anchor fixing, and casting applications in infrastructure structures.

Is the product flowable?

Yes. Its self-leveling structure provides complete filling without leaving gaps.

How long is the curing time?

Full mechanical strength is achieved within 7 days.

What are the packaging options?

It is available as 5 kg (Product Code: 33105) and 15 kg (Product Code: 33115) sets.