FİXA REPOX 310: Epoxy-Based Two-Component Structural Repair, Bonding and Installation Mortar

FİXA REPOX 310 is an epoxy resin-based, two-component, solvent-free, thixotropic structural repair and bonding mortar that provides high adhesion and mechanical strength on concrete, metal, wood, and stone surfaces. It offers a reliable and long-lasting solution for structural repair, filling, and installation applications.

Product Description

• Two-component (A+B) epoxy resin-based formulation
• Solvent-free and low VOC content
• Thixotropic consistency allows application on vertical and overhead surfaces without sagging
• Suitable for concrete, metal, wood, stone, brick, glass, polyester, and epoxy surfaces
• High mechanical strength and chemical resistance

Application Areas

Structural Bonding

• Bonding of concrete and prefabricated lightweight concrete elements
• Installation of steel, iron, and aluminum components
• Bonding applications on wood, stone, brick, glass, polyester, and epoxy surfaces
• Adhesion of expansion joint tapes

Repair and Filling

• Repair of reinforced concrete elements such as columns, beams, and shear walls
• Repair of wide cracks and damaged edges
• Industrial floor crack and joint repairs
• Filling of holes, gaps, and edge damages

Suitable for both indoor and outdoor applications.

Technical Specifications

Advantages

• Thixotropic Structure: Does not sag on vertical and overhead surfaces.
• High Adhesion: Excellent bonding performance on concrete, metal, stone, and wood surfaces.
• Solvent-Free Formula: Low VOC and environmentally friendly.
• High Mechanical Strength: Provides superior compressive, flexural, and tensile strength.
• Chemical Resistance: Resistant to acids, oils, and water.
• Easy Application: Can be applied manually with a trowel or spatula.
• CE Certified Quality Assurance
• Suitable for Indoor and Outdoor Use

Application Method

Surface Preparation

• Surfaces must be cleaned from dust, oil, rust, and loose particles.
• Surface moisture content should not exceed 4%.

Mixing

• Components A and B should be mixed according to the specified ratio.
• A low-speed mixer should be used to obtain a homogeneous mixture free from air bubbles.

Application

• Apply using a spatula or trowel.
• For bonding applications, surfaces should be joined and lightly pressed together.

Curing

• The applied area should be protected from vibration and loads for 24 hours.
• Full mechanical strength is achieved after 7 days.

Limitations and Precautions

• Do not apply on wet or waterlogged surfaces.
• Application temperature should not be below +10°C.
• Do not use the material after exceeding its pot life.
• Protect the application area from rain and direct sunlight during curing.

Conclusion

FİXA REPOX 310 is a solvent-free and thixotropic epoxy repair and installation mortar that provides high adhesion and mechanical strength on vertical and horizontal surfaces. It is an ideal solution for safe, durable, and professional applications on reinforced concrete, metal, wood, and stone surfaces.

Frequently Asked Questions (FAQ)

What is FİXA REPOX 310?

It is an epoxy-based, two-component, solvent-free structural repair and bonding mortar.

On which surfaces can it be used?

It can be applied on concrete, steel, wood, stone, brick, polyester, and glass surfaces.

What applications is the product suitable for?

It is suitable for structural repairs, filling, edge repairs, expansion joint tape bonding, and metal installation applications.

How long is the curing time?

Full curing is completed within 7 days.

What are the packaging options?

It is available in 2.5 kg and 5 kg sets (Product Code: 33208).