FİXA REPOX 410T: Epoxy-Based Adhesive and Installation Paste for CARBOFİX Plate Systems
Carbon plate applications in structural strengthening provide high strength and long-term durability. The adhesive used in these systems must ensure excellent bonding of the plates to the surface and provide safe load transfer.
FİXA REPOX 410T is a high-strength, epoxy-based, two-component, solvent-free, and thixotropic adhesive and installation paste specially developed for structural strengthening applications. It is fully compatible with CARBOFİX Plate systems.
Product Description
FİXA REPOX 410T is an epoxy resin-based, two-component, solvent-free adhesive and installation paste specially formulated for CARBOFİX Plate Systems.
Thanks to its thixotropic consistency, it can be applied on vertical and overhead surfaces without sagging. Its high viscosity ensures excellent adhesion of carbon plates to the surface.
With its high mechanical strength and chemical stability, it improves the long-term performance of structures. Its low VOC content makes it an environmentally friendly product.
Application Areas
FİXA REPOX 410T is used in integration with CARBOFİX systems in the following applications:
-
Interior and exterior applications
-
Reinforced concrete structures strengthened with CARBOFİX Plate systems
-
Bonding carbon plates to surfaces
-
Carbon plate installation applications
-
Structural strengthening of ceilings, beams, columns, and shear walls
-
Structural joints requiring high strength performance
-
Applications on concrete, stone, and metal surfaces requiring high adhesion
Technical Specifications
| Property | Value / Description |
|---|
| Chemical Structure | Epoxy resin-based, two-component |
| Purpose of Use | Carbon plate bonding and installation |
| Appearance | Thixotropic, grey paste consistency |
| Density (Mixed) | ~1.65 ± 0.05 kg/L |
| Compressive Strength | ≥ 80 MPa (EN 12190) |
| Flexural Strength | ≥ 35 MPa (EN 196-1) |
| Bond Strength (to concrete) | ≥ 3.0 MPa (failure in concrete) |
| Application Temperature | +10°C – +30°C |
| Pot Life (23°C) | 30–40 minutes |
| Full Curing Time | 7 days |
| VOC Content | Low – solvent-free |
| Packaging | 7 kg / 20 kg (Product Code: 33410) |
| Certification | CE Certified |
Advantages
- High adhesion: Provides strong and permanent bonding of carbon plates to surfaces.
- Thixotropic structure: Does not sag during vertical and overhead applications.
- High strength: Provides superior compressive, flexural, and tensile strength.
- Solvent-free: Environmentally friendly with low VOC content.
- Fully compatible with CARBOFİX Plate systems: Ensures maximum performance.
- Suitable for indoor and outdoor applications.
- CE certified quality assurance.
Application Method
Surface Preparation
-
The concrete surface must be dry, clean, and structurally sound.
-
Oil, dirt, dust, and loose particles must be completely removed.
Mixing
-
Components A and B are mixed according to the specified ratios.
-
A low-speed mixer should be used to achieve a homogeneous mixture.
Application
-
The prepared mixture is applied under the carbon plate and onto the surface at the required thickness using a trowel or spatula.
-
The carbon plate is pressed firmly onto the surface, and excess material should be removed.
Curing
-
The application area must be protected against impact, vibration, and moisture for 24 hours.
-
Full mechanical strength is achieved after 7 days.
Limitations and Important Considerations
-
Application temperature should not be below +10°C.
-
It should not be applied on damp surfaces or surfaces with standing water.
-
Mixtures exceeding the pot life period should not be used.
-
The surface must be protected from mechanical stresses during curing.
Conclusion: Reliable and Professional Solution for Carbon Plate Installation
FİXA REPOX 410T stands out with its high bonding performance and durability in structural strengthening applications performed with CARBOFİX Plate systems.
Its thixotropic structure allows safe application on vertical and overhead surfaces without sagging, while its low VOC content provides an environmentally friendly solution. It is a preferred professional product for long-lasting strengthening of reinforced concrete structures.
Frequently Asked Questions (FAQ)
What is FİXA REPOX 410T?
It is an epoxy-based, two-component, thixotropic adhesive and installation paste developed for CARBOFİX Plate systems.
Where is it used?
It is used for bonding and installing carbon plates onto concrete surfaces.
Is the product thixotropic?
Yes. It can be applied on vertical surfaces without sagging.
What is the curing time?
Full mechanical strength is achieved after 7 days.
What are the packaging options?
It is supplied in 7 kg and 20 kg sets (Product Code: 33410).