FİXA DUROPAINT – Durable Chlorinated Rubber-Based Floor Paint

FİXA DUROPAINT is a chlorinated rubber resin-based floor paint with a thixotropic structure, capable of forming a thick coating layer and suitable for cold application. It has been developed to provide high visibility, fast drying, and long-lasting performance in both indoor and outdoor environments.

Technical Specifications

• Chemical Base: Chlorinated rubber resin-based
• Appearance: Colored, thixotropic consistency
• Density: ~1.30 ± 0.05 g/cm³
• Solid Content: 60 ± 2%
• Drying Time: Touch dry 15–30 min · Hard dry 1–2 hours
• Full Cure: 24 hours
• Consumption: 200–400 g/m² (single coat)
• Application Temperature: +5°C to +35°C
• Shelf Life: 12 months (in unopened packaging, stored in a cool environment)

Areas of Application

• Indoor and outdoor areas
• Parking lots and roads with light traffic
• Pedestrian walkways and curb markings
• Factory and warehouse floors (areas with low chemical exposure)
• Sports and recreational courts
• Hotels, laundries, and service areas

Advantages

• Long-lasting color retention thanks to chlorinated rubber resin
• Thixotropic structure prevents sagging and dripping on vertical surfaces
• Cold application – no heating required
• Fast drying for quick return to service
• Durable film resistant to water, UV exposure, and abrasion
• Bright colors providing high visibility

Application Steps

Surface Preparation

The substrate must be clean, dry, and free from dust. Loose particles should be removed, and application should not be carried out on damp surfaces.

Mixing

The product should be thoroughly mixed before use. If necessary, a thinner may be added according to the manufacturer's recommendations.

Application

Apply using a brush, roller, or airless spray equipment. For the second coat, wait until the first coat has completely dried (approximately 1–2 hours). A minimum waiting period of 2 hours between coats is recommended.

Curing

Depending on ambient conditions, the surface can be fully opened to use after approximately 24 hours.

Application Recommendations

• Do not apply at temperatures below +5°C.
• Avoid application under direct sunlight, rain, or strong winds.
• Do not add water or any materials other than the recommended solvent/thinner.
• Drying time may increase under high humidity conditions.
• Clean application equipment with a suitable solvent immediately after use.

Frequently Asked Questions (FAQ)

Can DUROPAINT be used outdoors?

Yes. Thanks to its UV and water resistance, it is suitable for both indoor and outdoor applications.

Which surfaces can it be applied to?

Concrete, asphalt, and similar mineral-based surfaces.

What is the drying time?

Touch dry time is approximately 15–30 minutes, while full curing is achieved within 24 hours.

What is the recommended application temperature range?

Between +5°C and +35°C.

For which areas is it not recommended?

It is not recommended for heavy industrial environments requiring high chemical resistance. For such applications, epoxy- or polyurethane-based coating systems should be preferred.