FİXA ROUGH PLASTER (MACHINE APPLIED) WHITE – White Cement-Based Ready-Mix Plaster

FİXA ROUGH PLASTER (MACHINE APPLIED) WHITE is a white cement-based, single-component base coat plaster reinforced with fibers and chemical additives. Suitable for both machine and manual application, it provides excellent adhesion, smooth surface finishes, and long-lasting durability for interior and exterior projects. Thanks to its white cement formulation, it creates an aesthetically pleasing base for decorative finishes.

What is FİXA ROUGH PLASTER (MACHINE APPLIED) WHITE?

Its special formula, enriched with white cement and fiber reinforcement, helps reduce the risk of cracking while delivering superior adhesion. The product can be applied by spray machine or manually, offering labor savings and efficient application. It is an ideal solution for projects that require both high durability and an attractive appearance on interior and exterior surfaces.

Areas of Application

• Interior and exterior facades
• Wall and ceiling surfaces
• Brick, aerated concrete, pumice block, briquette, concrete, and fair-faced concrete
• Columns, beams, and reinforced concrete walls
• Facades requiring a white or light-colored decorative plaster finish

Technical Specifications

Advantages

• Provides a decorative, light-colored surface thanks to white cement
• Suitable for both machine and manual application
• Fiber reinforcement helps minimize cracking
• Excellent adhesion to all mineral-based substrates
• Single-component product requiring only water for mixing
• Delivers long-lasting durability
• Breathable structure helps prevent trapped moisture
• Fast application, saving time on large surfaces

Application Conditions and Steps

1. Surface Preparation

• The substrate must be clean, dry, and structurally sound.
• Dust, oil, paint residues, and loose particles must be removed.
• An adhesion-promoting primer is recommended for smooth or low-absorbency concrete surfaces.

2. Mortar Preparation

• Mix a 25 kg bag with 5.5–6.5 liters of water using a low-speed mixer for 3–4 minutes.
• Allow the mixture to rest for 5 minutes, then remix briefly before use.

3. Application

• Apply using a plaster spray machine or manually with a trowel.
• Recommended thickness is 10–30 mm per coat.
• Additional coats should be applied only after the previous coat has set.
• After application, level the surface with a straightedge or trowel.

4. Curing

• Protect the plaster from rapid drying.
• If necessary, lightly moisten the surface within the first 24 hours.
• Protect from direct sunlight, strong winds, and frost.

Application Recommendations

• Do not apply below +5°C or above +35°C.
• Do not add any external additives to the mixture.
• Prepared mortar should be used within approximately 2 hours.
• Wait at least 7 days before applying paint or decorative coatings.

Frequently Asked Questions (FAQ)

1. Where can it be used?

It can be used on brick, aerated concrete, pumice block, briquette, concrete, and fair-faced concrete surfaces in both interior and exterior applications.

2. How is the white color achieved?

The product is based on natural white cement and does not rely on pigments for its color.

3. Can it be applied by machine or by hand?

Yes. It is suitable for both application methods, although machine application is recommended for large areas.

4. What is the recommended application thickness?

The product can be applied at a thickness of 10–30 mm per coat.

5. How long should I wait before painting?

Under normal conditions, paint or decorative coatings can be applied after approximately 7 days, once the plaster has fully dried and cured.