FİXA FINE PLASTER (WHITE) – White Cement-Based Smooth Surface Finishing Plaster
FİXA FINE PLASTER (WHITE) is a professional finishing plaster based on white cement, enhanced with performance additives and designed as a single-component product. Suitable for both manual and machine application, it provides easy workability and helps create smooth, aesthetically pleasing surfaces.
Thanks to its excellent adhesion properties and natural white color, it creates a strong, uniform substrate before painting and decorative coating applications.
What is FİXA FINE PLASTER (WHITE)?
FİXA FINE PLASTER (WHITE) is a specially formulated finishing plaster containing high-quality white cement. It is designed to level surfaces and create a smooth base layer before painting or decorative finishing applications.
Applied over rough plaster, concrete, or fair-faced concrete surfaces, it provides a crack-resistant, uniform finish. It also improves surface consistency, reduces paint and coating consumption, and contributes to longer-lasting decorative applications.
Areas of Application
-
Interior and exterior facade applications
-
Wall and ceiling surfaces
-
Rough plastered substrates
-
Concrete and fair-faced concrete surfaces
-
Surface levelling before painting or decorative coating applications
-
Architectural projects requiring white-colored surfaces
Technical Specifications
| Property | Value |
|---|
| Chemical Composition | White cement-based, polymer- and chemical-modified |
| Color | White |
| Density | ~1.80 ± 0.05 kg/L (fresh mortar) |
| Water Mixing Ratio | 5.5–6.0 L water per 25 kg bag |
| Grain Size | Max. 1.2 mm |
| Application Thickness | 2–5 mm per coat |
| Consumption | ~1.8 kg/m² per 1 mm thickness |
| Application Temperature | +5°C to +35°C |
| Compressive Strength | ≥ 5 N/mm² |
| Adhesion Strength | ≥ 0.3 N/mm² |
| Shelf Life | 12 months in original unopened packaging stored in dry conditions |
Advantages
Aesthetic White Surface
Creates bright, decorative surfaces thanks to its white cement-based composition.
Easy Application
Suitable for both machine and manual application methods.
Smooth Substrate
Provides a uniform and even surface for paint and decorative coatings.
High Adhesion
Bonds strongly to concrete, plaster, and other mineral-based substrates.
Crack Resistance
Fiber reinforcement and special additives help reduce the risk of surface cracking.
Breathable Structure
Allows moisture vapor transmission while maintaining the natural balance of the wall.
Low Water Absorption
Enhances surface durability and long-term performance.
Excellent Workability
Spreads easily and allows efficient application on large surfaces.
Application Conditions and Steps
1. Surface Preparation
The substrate must be sound, clean, and dry. Dust, oil, paint residues, and loose particles must be completely removed.
Highly absorbent surfaces should be lightly dampened before application.
2. Mortar Preparation
Mix 25 kg of FİXA FINE PLASTER (WHITE) with 5.5–6.0 liters of clean water using a low-speed mixer.
Once a homogeneous consistency is achieved, allow the mixture to rest for approximately 5 minutes, then remix briefly before application.
3. Application
-
Apply using a steel trowel or plaster spray machine.
-
Recommended application thickness is 2–5 mm per coat.
-
For multiple coats, allow the previous coat to set before applying the next.
-
Finish the surface with a trowel to achieve a smooth appearance.
4. Curing
The surface should be protected from rapid drying after application.
If necessary, lightly moisten the surface during the first 24 hours.
Protect the applied surface from direct sunlight, strong winds, and frost.
Application Recommendations
-
Apply only when ambient and substrate temperatures are between +5°C and +35°C.
-
Prepared mortar should be used within approximately 2 hours.
-
Do not add foreign materials or additives to the mixture.
-
Ensure the surface is fully cured before applying paint or decorative coatings (approximately 24–48 hours).
Frequently Asked Questions (FAQ)
1. On which surfaces can FİXA FINE PLASTER (WHITE) be used?
It is used on rough plaster, concrete, and fair-faced concrete surfaces to create a smooth substrate before painting and decorative coating applications.
2. How is the white color achieved?
The product is based on natural white cement, which provides its bright and decorative appearance.
3. Can the product be machine applied?
Yes. It is suitable for both machine and manual application methods.
4. When can painting begin?
Painting can generally be carried out after 24–48 hours, once the surface has completely dried and cured.
5. Is it suitable for exterior applications?
Yes. FİXA FINE PLASTER (WHITE) is suitable for both interior and exterior use.