FİXA RIDGE TILE ADHESIVE MORTAR

FİXA RIDGE TILE ADHESIVE MORTAR is a cement-based, single-component adhesive mortar enhanced with special polymer additives for superior adhesion.

Developed specifically for installing roof ridge tiles, it provides a durable, long-lasting bond that withstands water, frost, and harsh weather conditions. It offers reliable performance, strong adhesion, and an aesthetically pleasing finish for professional roofing applications.

Product Description

FİXA RIDGE TILE ADHESIVE MORTAR has been specially formulated to create a secure and reliable bond in ridge areas, one of the most critical sections of roofing systems.

Its cement-based composition provides high mechanical strength, while advanced additives improve flexibility, workability, and application performance. It is suitable for both new roof installations and repair projects.

Technical Specifications

The values shown are average laboratory test results obtained from FİXA technical data sheets.

Areas of Application

FİXA RIDGE TILE ADHESIVE MORTAR is suitable for:

• Installation of roof ridge tiles
• Fixing tile-colored rain gutters
• Sloped and flat roof applications
• Exterior façade and roofing systems
• Concrete, mortar, and cement-based substrates

Advantages

High Bond Strength

Provides strong and reliable adhesion for roof ridge tiles.

Water and Frost Resistance

Delivers long-lasting durability under outdoor weather conditions.

Easy Application

Single-component formulation requires only water for mixing, ensuring quick and convenient application.

Matching Tile Color

Its tile-red color blends naturally with traditional roofing materials for an attractive finish.

High Mechanical Strength

Resists wind loads, temperature fluctuations, and vibration.

Cost-Effective Performance

Long working time and easy mixing help reduce labor time and application costs.

Application Instructions

Surface Preparation

The substrate must be clean, dry, sound, and free from dust, oil, and loose particles.

Any cracks or damaged areas should be repaired before application.

Mortar Preparation

• Mix 25 kg of powder with 6.0–6.5 liters of clean water.
• Blend using a low-speed mixer for 3–5 minutes until a homogeneous consistency is achieved.
• Allow the mixture to rest for 2–3 minutes, then remix briefly before use.

Application

• Apply the prepared mortar using a trowel or putty knife.
• Spread an even layer where the ridge tiles will be installed.
• Position the ridge tiles and remove excess mortar to achieve a clean, professional finish.
• Protect the applied area from rain, frost, and impact for at least 24 hours after installation.

Cleaning

Clean tools and application equipment with water immediately after use.

Hardened material can only be removed mechanically.

Application Recommendations

• Do not apply at temperatures below +5°C.
• Do not add any additives other than clean water.
• Avoid application under direct sunlight, strong wind, or extremely hot weather.
• Protect the installed mortar from water and mechanical impact during the curing period.
• Check the substrate moisture condition before application.

Frequently Asked Questions (FAQ)

1. Where can FİXA RIDGE TILE ADHESIVE MORTAR be used?

It is designed for installing roof ridge tiles and fixing tile-colored rain gutters.

2. What color is the product?

The mortar is tile red, providing a harmonious appearance with traditional roof tiles.

3. Is it resistant to rain and frost?

Yes. Once fully cured, it provides excellent resistance to water, frost, and outdoor weather conditions.

4. How long does it take to cure?

Initial setting begins in approximately 30 minutes, while full curing is achieved after about 24 hours.

5. Is it suitable for outdoor applications?

Yes. The product has been specifically developed for roofing and exterior construction applications.