Tekno Construction Chemicals Waterproofing Products | Cement-Based & Bitumen-Based Solutions
Tekno Construction Chemicals Waterproofing Systems
Tekno Construction Chemicals waterproofing products provide high-performance and fully waterproof solutions for terraces, foundations, wet areas, and roofing applications with both cement-based and bitumen-based product options.
Water and moisture can lead to reinforcement corrosion, crack formation, mold growth, and structural deterioration in reinforced concrete structures over time. For this reason, selecting the correct waterproofing system is critical for both structural safety and long service life. Tekno Construction Chemicals offers long-lasting protection through product groups developed for different waterproofing requirements.
Tekno Waterproofing Product Groups
Tekno waterproofing solutions consist of cementitious waterproofing mortars, bitumen-based coatings, polyurethane systems, and complementary detailing products. These systems can be applied in foundations, basements, terraces, roofs, wet areas, water tanks, and many other construction elements.
Cement-Based Waterproofing Products
Teknomer 100
A crystalline, single-component cement-based waterproofing material resistant to both positive and negative water pressure.
Teknomer 200
A two-component waterproofing mortar with high flexibility and crack-bridging capability.
Teknomer 300
A flexible waterproofing mortar with excellent UV resistance, especially preferred for terraces and balconies.
Teknomer 400
A fast-drying, brush-applied elastic waterproofing mortar designed for efficient applications.
Bitumen-Based Products
Teknomer Bitumen
A cold-applied, solvent-free, ready-to-use bitumen emulsion used for foundation and retaining wall waterproofing.
Teknomer Bitumen Rubber
An elastomeric waterproofing coating offering excellent crack-bridging performance. Suitable for both horizontal and vertical surfaces.
Teknomer Bitumen Tape
A self-adhesive sealing tape used for waterproofing joints, overlaps, and critical detailing areas.
Polyurethane and Hybrid Systems
Teknomer PU 1K
A single-component, UV-resistant, elastic polyurethane liquid waterproofing membrane suitable for terraces and roofs.
Teknomer PU 2K
A two-component polyurethane coating system preferred in industrial environments thanks to its high chemical resistance.
Teknomer Hybrid Seal
A solvent-free, UV-resistant sealing mastic produced with advanced hybrid technology.
Accessories and Detailing Products
Teknomer Geogrid
A reinforcing mesh used beneath waterproofing layers to increase mechanical strength and durability.
Teknomer Detail Tape
Provides complete waterproofing at corner joints, pipe penetrations, parapets, and other critical detailing areas.
Teknomer Primers
Available in solvent-based and water-based options to improve substrate adhesion before waterproofing applications.
Areas of Application
- Foundations and retaining walls
- Wet areas (bathrooms, kitchens, and toilets)
- Terraces and balconies
- Roof systems
- Water storage tanks and artificial ponds
- Elevator pits and basement structures
Application Process
1. Surface Preparation
The substrate must be dry, clean, and structurally sound.
2. Primer Application
A suitable primer should be applied according to the substrate type to improve adhesion.
3. Waterproofing Layer Application
The waterproofing material is applied in multiple coats using a brush, roller, or spray equipment. Successive coats should be applied in cross directions for optimum coverage.
4. Detail Reinforcement
Critical areas should be reinforced using waterproofing tapes and supporting accessories.
5. Protective Layer
After complete curing, screeds, renders, or finishing coatings may be applied if required.
Advantages
Complete Waterproof Protection
Provides effective protection against both positive and negative water pressure.
High Flexibility
Accommodates structural movement and helps resist micro-crack formation.
UV and Chemical Resistance
Delivers long-term performance in exposed outdoor environments and industrial applications.
Easy Application
Can be applied quickly and efficiently using brush, roller, or spray methods.
Frequently Asked Questions (FAQ)
1. Where are cement-based waterproofing products used?
They are commonly used in foundations, retaining walls, basements, and interior waterproofing applications. They provide protection against both positive and negative water pressure.
2. Should I choose polyurethane or bitumen waterproofing?
Polyurethane products are recommended for exposed areas subject to UV radiation, while bitumen-based systems are generally preferred for foundations and retaining walls.
3. What is the drying time?
Depending on the product, drying times typically range from 4 to 24 hours. Waiting times between coats are specified on the product packaging and technical documentation.
4. Which standards do the products comply with?
Tekno waterproofing products are manufactured in accordance with TS EN standards and CE certification requirements.
Why Choose Tekno Waterproofing Systems?
Tekno Waterproofing Systems provide reliable protection for residential, commercial, and industrial structures. Combining advanced cementitious technologies, bitumen-based coatings, polyurethane membranes, and professional detailing products, they help extend service life, improve durability, and protect structures against water-related damage.
Tekno Construction Chemicals waterproofing products offer reliable and long-lasting protection against water and moisture in all types of construction projects.